SoliSense - Turbidity and SS Monitor
With the SoliSense® range of Suspended Solids/Turbidity analyzers you get a world’s first sensor. The first sensor to successfully incorporate four measuring technologies. For multiple measuring ranges the one sensor can monitor Turbidity and Suspended Solids from 0.1 NTU to 2% solids in one sensor. A less expensive SoliSense® is available for 0-100 NTU.
With the SoliSense® range of Suspended Solids/Turbidity analyzers you get a world’s first sensor. The first sensor to successfully incorporate four measuring technologies. For multiple measuring ranges the one sensor can monitor Turbidity and Suspended Solids from 0.1 NTU to 2% solids in one sensor. A less expensive SoliSense® is available for 0-100 NTU.
Suspended Solids Meter Principle of Operation
The SoliSense® Turbidity Meter Suspended Solids Analyzer instrument uses two light emitters and four detectors arranged around a circular aperture. This eliminates interference from extraneous light sources and compensates for detector soiling and the aging of the optical modules. The arrangement of this 8 beam technology allows measurement of the light transmitted, scattered or reflected by a medium. This allows for the most precise measurement of turbidity or suspended solids in a liquid from 0.1 NTU up to 2% solids! For suspended solids greater than 2% please see our dry solids analyzer.
- Auto-clean optical sensor
- Stable and reliable – excellent process control
- Suitable for all potable, waste and process waters
- Up to 6 months between maintenance
- Up to 3 months between calibration
- From 0.1 NTU to 2% Solids
Specification
Range: Selectable 0.02 NTU to 25%* Dry Solids
Accuracy: < 1% of measuring range end value
Reproducibility: 0.5 %
Comms: TCP/IP, Modbus, RS232, RS485, 420mA
Power supply: 100-250 V AC, 50/60 Hz 8-36 V DC
Ambient temperature: -20 to +50C
Process temperature: 0-50C
Lamp Source: IR LED
Enclosure rating: IP65